User`s guide

support Static Turbo for data rates up to 108 Mbps.
A Dynamic Turbo – allows connection to 802.11a networks that
support Dynamic Turbo for data rates up to 108 Mbps.
Step 5 Specify the security level
Choose the security method to protect your data that only authorized
network users could access the network. You can choose WEP, WPA
or None for your device.
If no security is needed, simply choose the None option:
The same encryption settings
must also be enabled on
wireless devices on your
network.
Security: select the encryption method or disable security.
None – disable security.
WEP – enable WEP encryption.
WPA – enable WPA with Preshared Key encryption.
Authentication Type: choose the one of the following modes.
Open Authentication – the LiteStation2/LiteStation5 is visible to
all devices on the network.
Shared Authentication – allows communication only with other
devices with identical WEP settings.
WEP Key Length: select the Key length here, either 64-bit, or 128-bit.
Key Type: use the HEX or ASCII option to specify the character
format for the WEP key.
Key Index: specify the Index of WEP Key.
WEP Key: enter the encryption key to be used to encrypt and decrypt
wireless traffic:
For 64-bits – specify pre-shared key as 5 HEX (0-9, A-F, and a-f)
pairs (e.g. 0011223344) or 5 ASCII characters.
For 128-bits – specify pre-shared key as 13 HEX (0-9, A-F, and
a-f) pairs (e.g. 00112233445566778899AABBCC) or 13 ASCII
characters.
WPA Preshared Key: enter a passphrase for WPA encryption. The
preshared key is an alpha-numeric password between 8 and 63
characters long.
6