User`s guide

IP Address: enter IP address for subscriber station
LiteStation2/LiteStation5.
Netmask: enter a subnet mask for subscriber station
LiteStation2/LiteStation5.
Gateway IP: enter a gateway IP address for subscriber station
LiteStation2/LiteStation5.
Step 3 Assign an ESSID to subscriber station
Use Link Setup menu to specify the ESSID of the wireless device to
which the subscriber station will be associated:
ESSID: specify the ESSID of the wireless network device which the
LiteStation2/LiteStation5 will associate to.
Refer to the section Basic Wireless Settings for detailed information.
Step 4 Specify the IEEE 802.11 mode
Specify the 802.11 wireless network mode by which the subscriber
station will communicate with the wireless device:
Be sure, that chosen IEEE
802.11 mode is the same as
configured on the wireless
device.
IEEE 802.11 Mode: select the IEEE 802.11 mode of your wireless
network.
B only – connect to a 802.11b only network.
B/G Mixed – connect to a 802.11b/g network.
G only – connect to a 802.11g only network.
G Dynamic Turbo – connect to a 802.11g network using SuperG.
For LiteStation5 model this screen shot will differ, choose the
following options:
A – allows connection to 802.11a networks.
A Static Turbo – allows connection to 802.11a networks that
5