User`s guide

Quick Setup Guide

If you do not change any of

configuration parameters the

default values will be used.

This Quick Setup Guide will guide you through quickly and easily

configuration of this subscriber station. We suggest you change these

parameters:

 Change IP address (static or dynamic),

 Define the ESSID to which the subscriber station will be

associated,

 Define the IEEE 802.11 mode,

 Define the wireless security (None, WEP or WPA),

 Change the administrator’s password.

For detailed setup and configuration instructions, please refer to the

chapter Configuration Guide.

Follow these steps for subscriber station quick setup via web-browser

interface:

Step 1 Login to the web management

Open the web browser and type the default IP address of the

LiteStation2/LiteStation5 device http://192.168.1.20/ into the browser

address field. You will be prompted to enter the administrator login

credentials:

 User Name: ubnt

 Password: ubnt

After successful administrator log on you will see the main page of the

subscriber station web management interface.

Step 2 Configure network settings

The IP configuration as described below is required for LiteStation2

and LiteStation5 management purposes. IP addresses can either be

retrieved from a DHCP server or configured manually.

Use the Link Setup menu to configure the device IP settings:

Bridge IP Address: specify the IP mode.

DHCP – choose to assign the dynamic IP address and gateway

address by the local DHCP server.

Static – choose to assign a static IP address.