User`s guide

IP Address: enter IP address for subscriber station
LiteStation2/LiteStation5
Netmask: enter a subnet mask for subscriber station
LiteStation2/LiteStation5.
Gateway IP: enter a gateway IP address for subscriber station
LiteStation2/LiteStation5.
Advanced Link Setup
The Advanced Link Setup page allows you to manage advanced
settings that influence on the subscriber station
LiteStation2/LiteStation5 performance.
Advanced Wireless Settings
The advanced wireless settings are only for more technically
advanced users who have a sufficient knowledge about wireless LAN.
These settings should not be changed unless you know what effect
the changes will have on your subscriber station.
Figure 10 – Advanced Wireless Settings
RTS Threshold: determines the packet size of a transmission and,
through the use of an access point, helps control traffic flow. The
range is 0-2347bytes, or word ‘off’. The default value is 2347 (2347
means that RTS is disabled).
Fragmentation Threshold: specifies the maximum size for a packet
before data is fragmented into multiple packets. This value should
remain at its default setting of 2346. The range is 256-2346 bytes, or
word ‘off’. Setting the Fragmentation Threshold too low may result in
poor network performance. Only minor modifications of this value are
recommended.
Distance: specify the distance value in miles using slider or enter the
value manually. The signal strength and throughput falls off with
range, so, the farther the distance for the link, the higher gain the
antenna should have. Changing the distance value will change the
ACK Timeout to the appropriate value of the distance.
14