User`s guide

support Static Turbo for data rates up to 108 Mbps.
A Dynamic Turbo – allows connection to 802.11a networks that
support Dynamic Turbo for data rates up to 108 Mbps.
The list of data rates will vary
according the selected IEEE
802.11 mode.
Data Rate: choose the data rates in Mbps at which
LiteStation2/LiteStation5 should transmit packets to or receive
packets from Access Point. Use Auto option if you are having trouble
getting connected or losing data at a higher rate. In this case the
lower data rates will be used by station automatically.
Wireless Security
This section enables you to set parameters that control how the
subscriber station associates to a wireless device and encrypts and
decrypts data:
Figure 6 – Wireless Security Settings
Security: select the encryption method.
None – disable security.
WEP – enable WEP encryption.
WPA – enable WPA with preshared key encryption.
Authentication Type: choose the one of the following modes.
Open – the LiteStation2/LiteStation5 is visible to all devices on the
network.
Shared Key – allows communication only with other devices with
identical WEP settings.
WEP (Wired Equivalent Privacy) is based on the IEEE 802.11
standard and uses the RC4 encryption algorithm. Enabling WEP
allows you to increase security by encrypting data being transferred
over your wireless network. Enable a WEP security:
WEP with the same encryption
settings must also be enabled on
wireless devices on your
network.
Figure 7 – Configuration of the WEP Security
WEP Key Length: select the Key length here, either 64-bits, or 128-
bits.
12