User`s guide

ESSID: specify the ESSID of the wireless network device where the
LiteStation2/LiteStation5 will be associated to.
Use the Select… button next to ESSID entry field to load the Site
Survey tool. Site Survey will search for all wireless networks (SSID) in
range of the LiteStation2/LiteStation5 and allow you to select one for
association. In case the selected network uses encryption, you first
need to setup encryption on your LiteStation2/LiteStation5.
Figure 5 – Site Survey Scan
Select: click to associate chosen wireless network with the subscriber
station LiteStation2/LiteStation5.
Scan: click to refresh the wireless network table.
Close this window: click to close Site Survey window.
Country Code: choose from drop-down list the country in which you
will use the subscriber station LiteStation2/LiteStation5.
Output Power: specify the wireless card output power at which your
client adapter transmits data in dBm using slider. When entering
output power value manually, the slider position will change according
to the entered value. The transmit power level that is actually used is
limited to the maximum value allowed by your country's regulatory
agency.
IEEE 802.11 Mode: select the IEEE 802.11 mode of your wireless
network.
For LiteStation2 choose 802.11b/g options:
B only – allows connection to 802.11b networks.
B/G Mixed – allows connection to 802.11b and 802.11g networks.
G only – allows connection to 802.11g networks.
G Dynamic Turbo – connect to the wireless network that
supports 802.11g Dynamic Turbo mode for data rates up to 108
Mbps.
As the LiteStation5 operates in 802.11a mode, for this model choose
the following options:
A – allows connection to 802.11a networks.
A Static Turbo – allows connection to 802.11a networks that
11