User`s guide

Figure 3 – Antenna alignment Tool
TX Rate: displays the current data transmission rate.
RX Rate: displays the current data reception rate.
Channel: displays the channel that LiteStation2/LiteStation5 uses to
transmit and receive data.
Frequency: displays the frequency at which LiteStation2/LiteStation5
transmits packets to or receives packets from Access Points.
Security: displays the security level on the LiteStation2/LiteStation5.
QoS Status: displays the QoS Status of the LiteStation2/LiteStation5.
MAC: displays current MAC address of the LiteStation2/LiteStation5.
IP address: displays current IP address of the
LiteStation2/LiteStation5.
Uptime: indicates the time, expressed in hours, minutes and seconds
since last hard-reboot [days, hours:minutes:seconds].
Errors of Wireless Interface: displays the statistics of wireless
interface errors.
Link Setup
The Link Setup page allows you to manage general parameters of
the subscriber station LiteStation2/LiteStation5.
Basic Wireless Settings
The general wireless settings, such as wireless device ESSID,
country code, output power, 802.11 mode and data rates can be
configured on this section:
Figure 4 – Basic Wireless Settings
10