User`s guide

6
WPA Pre-shared Key: enter a passphrase for WPA™ or WPA2™ encryption. The pre-
shared key is an alpha-numeric password between 8 and 63 characters long.
Click Change button to save the changes.
Step 6 Change administrator password
For the security reasons the default administrator’s password should be changed
immediately. Use the System menu and specify the parameters:
Current Password: enter a current password value. Default administrators password is
ubnt.(Default username is also ubnt)
New Password: enter a new password value used for administrator authentication.
Verify Password: re-enter the new password to verify its accuracy.
Click Change button to save the changes.
Step7 Apply changes
After each configuration change the informational message suggesting you to apply
changes and reboot the device will appear:
Click Apply button to apply the changes and reboot the device.
Click Discard button to discard the changes.
Pop-up progress window will appear during the Apply operation:
After the configuration of the general settings, the device is ready for basic operation.
Web interface menu can be used for further device configuration. Please refer to the
chapter Configuration Guide for detailed configuration instructions.