User`s guide

5
A (Dynamic Turbo) – connect to a 802.11a network which supports Dynamic
Turbo feature.
A (Static Turbo) – connect to a 802.11a network which supports Static Turbo
feature.
Step 5 Specify the security mode
Choose the security method to protect your data that only authorized network users
could access the network. You can choose WEP, WPA, WPA2 or None security
methods for your device.
If no security method will be used, choose the None option (selected by default):
Security: select the security mode of your wireless network.
None – disable security.
WEP – enable WEP encryption.
WPA – enable WPA™
i
with Pre-shared Key encryption.
WPA2 – enable WPA2™ with Pre-shared Key encryption.
Authentication Type: choose the one of the following authentication modes for WEP
security method:
Open Authentication – station is authenticated automatically (more secure
method).
Shared Authentication – station is authenticated after the challenge, generated by
AP (less secure method).
WEP Key Length: select the WEP Key length here, either 64-bit, or 128-bit.
Key Type: use the HEX or ASCII option to specify the character format for the WEP
key.
WEP Key: enter the WEP encryption key to be used to encrypt and decrypt wireless
traffic:
For 64-bits – specify pre-shared key as 5 HEX (0-9, A-F or a-f) pairs (e.g.
00112233AA) or 5 ASCII characters.
For 128-bits – specify pre-shared key as 13 HEX (0-9, A-F or a-f) pairs (e.g.
00112233445566778899AABBCC) or 13 ASCII characters.
Key Index: specify the Index of the WEP Key used.