User`s guide

21
Figure 22 – SNMP Agent Configuration
Enable SNMP Agent: control will enable SNMP Agent.
SNMP Community: specify SNMP community string. It is required to authenticate
access to MIB objects and functions as embedded password. The device supports a
Read-only community string that gives read access to authorized management stations
to all the objects in the MIB except the community strings, but does not allow write
access.
Contact: specify the identity or the contact who should be contacted in case a
emergency situation arise.
Location: specify the physical location of the device.
System
This page enables administrator to customize, reboot the device, set it to factory
defaults, upload a new firmware, backup or update the configuration and configure
administrator’s credentials.
Firmware
Use this section to find out current software version and update the device with the new
firmware.
The device firmware update is compatible with all configuration settings. When the
device is updated with a newer version or the same version firmware builds, system
configuration will be preserved.
Figure 23 – Firmware Upgrade. Step 1
Firmware version: displays version of the current firmware.
Upgrade…: click to load the device firmware upgrade window.