User`s guide

13
Figure 10 – Site Survey Scan
Select the Access Point from the list and click Select button for association.
Click Scan button to refresh the list of available wireless networks.
Close this window button closes Site Survey window.
Wireless Security
This section enables you to set parameters that control how the subscriber station
associates to a wireless device and encrypts/decrypts data:
Figure 11 – Wireless Security Settings
Security: select the security mode of your wireless network.
None – disable security.
WEP – enable WEP encryption.
WPA – enable WPA™ with Pre-shared Key encryption.
WPA2 – enable WPA2™ with Pre-shared Key encryption.
WEP (Wired Equivalent Privacy) is based on the IEEE 802.11 standard and uses the
RC4 encryption algorithm. Enabling WEP allows you to increase security by encrypting
data being transferred over your wireless network. Enable a WEP security:
Figure 12 – Configuration of the WEP