User`s guide

10
Extra Info: displays the current usage statistics in pop-up window:
Show Stations… selection lists the stations which are connected to the device while
operating in Access Point mode. Each station RSSI, Tx Rate and Idle time (sec) can
be updated using the Reload button:
Figure 4 – Current Status of the Associated Stations
Show ARP Tables… selection lists all the entries in the system ARP tables. The list
can be updated using the Reload button:
Figure 5 – Current Status of the system ARP tables
Show Routes… selection lists all the entries in the system routing tables. The list
can be updated using the Reload button:
Figure 6 – Current Status of the system routing tables
Show DHCP Leases… selection shows the current status of the leased IP
addresses by the device’s DHCP server. Interface name shows from which device
interface DHCP client which has specified MAC Address is connected. Remaining
Lease time shows for how long the leased IP address will be valid and reserved for
particular DHCP client. The list can be updated using the Reload button:
Figure 7 – Current Status of the DHCP leases
LAN Statistics: section displays the detailed receive and transmit statistics (Bytes,
Packets, Errors) of LAN (Ethernet) interface.
WLAN Statistics: section displays the detailed receive and transmit statistics (Bytes,
Packets, Errors) of wireless interface.
WLAN Errors: section displays the counters of 802.11 specific errors which were
registered on wireless interface (invalid packets received, transmitted excessive
retries, missed beacons and other).