User Manual

Ports
Ethernet Port Supports 10/100 connections and passive PoE.
This port should be connected to the LAN and DHCP server.
Reset Button To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the LiteBeam is
already poweredon. Alternatively, the LiteBeam may be reset
remotely via a Reset button located on the bottom of the
PoEAdapter.
LEDs
Wireless Connection The LED will light green
when a wireless connection is established.
Ethernet The LED will light steady green when
an active Ethernet connection is made and flash
when there is activity.
Power The LED will light green when the device
is connected to a power source.