5 GHz airMAX® ac Radio with InnerFeed® Technology Model: LBE-5AC-Gen2
Introduction Thank you for purchasing the Ubiquiti Networks® LiteBeam® 5AC Gen 2 radio. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents Antenna Feed Feed Receiver Knob Kit Center Reflector Panel Azimuth Mount Gigabit PoE (24V, 0.3A) with Mounting Bracket Side Reflector Panels (Qty. 2) Elevation Mount Power Cord Metal Strap Quick Start Guide Products may be different from pictures and are subject to change without notice.
Installation Requirements • 7 mm socket wrench or screwdriver • Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.
Hardware Overview Bottom View Technology LEDs Reset Button Ethernet Port Antenna Feed Reflector Assembly Securing Arms Port Cover Feed Receiver Elevation Mount Azimuth Mount
LEDs Ethernet The LED will light steady blue when an active Ethernet connection is made and flash when there is activity. Power The LED will light blue when the device is connected to a power source. Button Reset To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the LiteBeam AC is powered on. The LiteBeam AC may also be reset remotely using the auxiliary Reset button located on the bottom of the Gigabit PoE adapter.
