® Instant 802.
Introduction Thank you for purchasing the Ubiquiti Networks® Instant 802.3af Gigabit Indoor PoE Converter. This Quick Start Guide is designed to guide you through installation and also includes the warranty terms. Package Contents ® Instant 802.3af Gigabit Indoor PoE Converter Model: INS-3AF-I-G QUICK START G UIDE INS-3AF-I-G Quick Start Guide TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above).
Hardware Overview PoE In PoE Out PoE In Gigabit 802.3af PoE port. Connect this port to an auto-sensing 802.3af PoE Switch. The switch will automatically activate PoE. PoE Out Gigabit 24V passive PoE port. Connect this port to a 24V passive PoE device.
Installation 1. Connect the Ethernet cable from an 802.3af PoE switch to the PoE In port.
2. Connect an Ethernet cable to the PoE Out port. 3. Connect the other end of the Ethernet cable to the PoE device.
Specifications INS-3AF-I-G Dimensions Weight Network Interface PoE In (802.3af ) PoE Out (24V Passive) Max. Power Output Power Method Power Input ESD/EMP Protection Operating Temperature Ø 30.26 x 95.5 mm (Ø 1.91 x 3.76") 50 g (1.76 oz) (1) Gigabit RJ45 Port (1) Gigabit RJ45 Port 24V, 0.5A 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) 48V, 802.
Safety Notices 1. 2. 3. Read, follow, and keep instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information 1. 2. 3. 4. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Warranty Conditions The above warranty does not apply if the Product: (I) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks’ authorized representatives, or as approved by Ubiquiti Networks in writing; (II) has been painted, rebranded or physically modified in any way; (III) has been damaged due to errors or defects in cabling; (IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada CAN ICES-3(A)/NMB-3(A) This Class A digital apparatus complies with Canadian CAN ICES-3(A). CAN ICES-3(A)/NMB-3(A) Cet appareil numérique de la classe A est conforme à la norme NMB-3(A) Canada. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Online Resources Support support.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.
www.ubnt.com ©2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, and the Ubiquiti beam logo trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
