User's Manual
Table Of Contents
7
EdgeSwitch User Guide
Ubiquiti Networks, Inc.
Chapter 3: Dashboard
Chapter 3: Dashboard
The Dashboard screen displays a summary of the
link status information, current values of the basic
configuration settings, network settings and information,
and traffic statistics. You can also configure port settings.
Total Throughput Displays the throughput as related to
the currently active ports and their link status information.
For example, if there is only one active port and it is set to
100 Mbps in full-duplex mode, then the maximum Total
Throughput is 100 Mbps, shown with a complete circle.
The throughput dimension (bps, kbps, Mbps) changes
dynamically depending on the mean throughputvalue.
Active Ports Displays the percentage of usage (all ports
combined).
Port Utilization Displays the port utilization as related
to each active port and its link status information. For
example, if there is only one active port and it is set to
100 Mbps in full-duplex mode, then the maximum Port
Utilization is 100%, shown with a full bar to indicate the
maximum theoretical utilization for the port’s link state.