User Manual

21
EdgeSwitch User Guide
Ubiquiti Networks, Inc.
Chapter 6: Tools
Chapter 6: Tools
The Tools screen offers the MAC forwarding table and
pingtest.
MAC Table
The MAC Forwarding Table displays information, including
MAC addresses, of the hardware devices using the
EdgeSwitch.
MAC Table
All ports All ports is the default. To view information
about the hardware device using a specific port, select the
port from the drop-down list.
Search The Search field automatically filters MAC and IP
addresses containing specified numbers or letters as you
enter them.
Refresh To refresh the window, click Refresh.
The MAC Forwarding Table reports the Port number,
VLAN ID, MAC Address, IP Address, and Hostname for each
hardware device.
• Ping If the IP address is displayed, then you can click
the Ping
PING
icon to start a ping test.
Ping
You can ping other devices on the network directly from
the EdgeSwitch. The Ping tool uses ICMP packets to check
the preliminary link quality and packet latency estimation
between two network devices.
Ping
Address Enter the IP address.
Packet size The default is56 bytes. To specify the size of
the packet in bytes, click Change parameters.
Packet count The default is 10. To specify the number
of packets to send for the ping test, click Change
parameters.