User Manual

Installation Requirements
• For indoor applications, use Category 5 (or above) UTP
cabling approved for indoor use.
• For outdoor applications, shielded Category 5 (or above)
cabling should be used for all wired Ethernet connections
and should be grounded through the AC ground of the
power supply.
We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial‑grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable
WARNING: To reduce the risk of fire or electric shock, do
not expose the EdgeRouter X SFP to rain or moisture.
Note: Although the cabling can be located outdoors,
the EdgeRouter X SFP itself should be housed inside
a protective enclosure.
Hardware Overview
Front Panel
SFP (eth5/SFP)
RJ45 (eth0-eth4)
Port Description
eth5/SFP
The SFP port is hot-swappable and supports
a 100 Mbps or Gigabit fiber SFP module.
eth0‑eth4
RJ45 ports support passive 24V PoE output
and 10/100/1000 Ethernet connections.