Gigabit+ Powerline System with 802.
Introduction Thank you for purchasing the Ubiquiti Networks® EtherMagic™ Gigabit+ Powerline System with 802.3af/at or 24V Passive PoE. This Quick Start Guide is designed to guide you through the installation and also includes the warranty terms.
EtherMagic Overview An EtherMagic Gigabit+ network consists of one EtherMagic Switch and one or more EtherMagic EndPoints. Each EndPoint provides 802.3af/at or 24V passive PoE, and must be paired with a Switch to create a network. Up to 10 EtherMagic networks are supported on the same electrical circuit, and up to 32 EndPoints may be paired with a single Switch. 802.3af 24V Passive 802.
Hardware Overview EtherMagic Switch Wall Plug Adapter LEDs LAN Port Reset Button Bottom View
Wall Plug Adapter Connects and mounts the Switch directly to the power outlet. The adapter can be removed and replaced with the included Power Cord for remote mounting. LAN Port Gigabit Ethernet port used to connect the Switch to the LAN and DHCP server. Reset Button To reset the Switch to factory defaults, press and hold the button for more than 10 seconds while the Switch is powered on. The Switch can also be reset using the EtherMagic app.
EtherMagic EndPoint Top View Reset Button PoE Port LEDs Wall Plug Adapter
Reset Button To reset the EndPoint to factory defaults, press and hold the button for more than 10 seconds while the EndPoint is powered on. The EndPoint can also be reset using the EtherMagic app. PoE Port 48V 802.3af/at auto-sensing or 24V passive PoE Gigabit Ethernet port used to power and connect a device to the EtherMagic network. 802.3af/at is the default setting. PoE settings can be configured using the EtherMagic app. Wall Plug Adapter Connects and mounts the EndPoint directly to the power outlet.
Hardware Installation For optimal performance, connect the EtherMagic Switch and EndPoints directly to wall outlets of the same electrical circuit. The Switch and EndPoints can be plugged in and mounted to the outlets directly using the Wall Plug Adapter, or plugged in using the optional Power Cord. WARNING: EtherMagic is for indoor use only. To reduce the risk of fire or electric shock, do not expose the EtherMagic modules to rain or moisture. EtherMagic Switch Installation 1.
2. (Optional) If using the Power Cord: a. Detach the Wall Plug Adapter from the Switch. b. Connect the Power Cord.
3. Plug the Switch directly to an electrical outlet. or 4. Connect an Ethernet cable to the LAN port on the Switch. 5. Connect the other end of the Ethernet cable to your LAN (switch or router).
EtherMagic EndPoint Installation 1. Detach the Mounting Bracket from the EndPoint by sliding it in the direction shown below. 2. (Optional) If using the Power Cord: a. Detach the Wall Plug Adapter from the EndPoint.
b. Connect the Power Cord. 3. Plug the EndPoint directly to an electrical outlet.
4. Connect an Ethernet cable to the PoE port on the EndPoint. 5. Connect the other end of the Ethernet cable to your 24V/48V PoE device. Note: Non-PoE devices can be safely connected to the EndPoint for EtherMagic networking without PoE. The PoE port is set to 48V auto (802.3af/at) by default. For 24V passive PoE, use the EtherMagic app to configure the PoE setting to 24V passive.
Mounting (Optional) If the Power Cord is being used, the EtherMagic module may be mounted for added stability. 1. Place the Mounting Bracket at the desired location with the mounting tabs facing up, and mark the two holes. 2. Pre-drill the holes if necessary, and secure the bracket using two fasteners (not included). 3. Align the slots on the EtherMagic module with the tabs of the Mounting Bracket, and then slide the module down.
EtherMagic App The EtherMagic app is used to set up and manage your EtherMagic devices, and also provides device and network statistics. The EtherMagic app is available as a free download from the Google Play™ store. Note: The mobile device must be operating Android version 4.3 or above to support Bluetooth LE. When using the app, ensure Bluetooth is on, and the Switch and Wi-Fi of your mobile device are connected to the same LAN. Pairing Each EndPoint must be paired with a Switch.
3. A list of new Switches will appear. Tap the Switch you would like to pair. 4. Switch Info will appear, displaying the Switch details.
5. Tap the EndPoint List tab, and then tap the EndPoint you would like to pair with the Switch. 6. Scroll down and tap Pair with Switch. 7. Upon successful pairing, the Link Quality of the connection will be displayed. Repeat steps 5 and 6 to pair additional Endpoints with the Switch.
Specifications EM-S, EM-EP Dimensions EM-S EM-EP Weight EM-S EM-EP 107 x 62.4 x 31.7 mm (4.21 x 2.46 x 1.25") 107 x 62.4 x 40.7 mm (4.21 x 2.46 x 1.60") 135 g (4.76 oz) 190 g (6.70 oz) Networking Interfaces (1) PLC, 1200 Mbps (1) RJ45, 10/100/1000 Mbps Management Interface EtherMagic App PoE Out (EM-EP Only) Modes PoE+ Voltage Range Max. PoE+ Wattage Passive PoE Voltage Range Max. Passive PoE Wattage 802.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
This radio transmitter (FCC: SWX-EMS) has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Cet émetteur radio (IC: 6545A-EMS) a été approuvée par Industrie Canada pour l’exploitation avec l’antenne types énumérés ci-dessous avec le gain maximal admissible et requis l’impédance de l’antenne pour chaque type d’antenne indiqué. Types d’antenne non inclus dans cette liste, ayant un gain supérieur au gain maximal indiqué pour ce type, sont strictement interdits pour une utilisation avec cet appareil.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Lietuviškai [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttiva 1999/5/KE.
