8-Port Router with 2 Combination SFP/RJ45 Ports Model: ERPro-8
Introduction Thank you for purchasing the Ubiquiti Networks® EdgeRouter™ PRO, which is part of the EdgeMAX® platform. For more information, visit www.ubnt.com/edgemax This Quick Start Guide is designed to guide you through installation and show how to access the EdgeOS™ Configuration Interface. This guide also includes the warranty terms and is for use with the EdgeRouter PRO, model ERPro-8.
Hardware Overview Front Panel Ports Console RJ45 (eth0-eth7) SFP (eth6-eth7) USB Interface Description Console RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45‑to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. (If your computer does not have a DB9 port, then you will also need a DB9 adapter.
Front Panel Button Reset Button Description There are two methods to reset the EdgeRouter PRO to factory defaults: Reset • Runtime reset (recommended) The EdgeRouter PRO should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the right LED on RJ45 port eth7 starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the EdgeRouter PRO will automatically reboot.
Front Panel LEDs The LEDs on the left side of the RJ45 ports are not used at this time.
Back Panel Mounting Holes Mounting Holes Fans Power Ventilation Holes Note: There are additional ventilation holes on the sides of the EdgeRouter PRO. Installation Requirements • Phillips screwdriver • Standard-sized, 19" wide rack with a minimum of 1U height available • For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.
Hardware Installation 1. Connect the Power Cord to the Power port of the EdgeRouter PRO. 2. Attach the EdgeRouter PRO to the rack using the four Mounting Screws. (If the rack has square slots, then use the Cage Nuts with the Mounting Screws.) Note: Keep 20 mm of clearance next to the ventilation holes for adequate airflow. 3. Connect the other end of the Power Cord to a power outlet.
Using SFP Ports To use an SFP port: 1. Remove the protective plug covering the SFP port. 2. Plug a fiber SFP module into the SFP port. SN: DDM 179 m M - 15 826 KM 310n 20K SC-2 0 /Rx1 s SM/ 0M 50nm 00 Mbp 1 Tx15 F1000 E 130 Note: The corresponding RJ45 port will be deactivated. 05 3. Connect a fiber optic cable to the fiber SFP module. Then connect the other end of the cable to another fiber device. For information about compatible fiber SFP modules, visit: community.ubnt.
Accessing the EdgeOS Configuration Interface 1. Connect an Ethernet cable from the Ethernet port of your computer to the port labeled eth0 on the EdgeRouter PRO. 2. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser. Type https://192.168.1.1 in the address field. Press enter (PC) or return (Mac). 4. The login screen will appear. Enter ubnt in the Username and Password fields.
Specifications EdgeRouter PRO Dimensions 484 x 164 x 44 mm (19.06 x 6.46 x 1.73") Weight 2.3 kg (5.07 lb) Max. Power Consumption 40 W Power Method Power Supply 110 - 240VAC Internal AC/DC Power Adapter, 60 W (24V, 2.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
www.ubnt.com ©2013-2014 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX, EdgeOS, EdgeRouter, and TOUGHCable are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
