User guide

KE
Chapter 8: Services TabAirRouter HP User Guide
Ubiquiti Networks, Inc.
System Log
Enable Log This option enables the registration routine
of the system log messages. By default it is disabled.
?+ Enable Remote Log Enables the syslog remote sending
function while System log messages are sent to a
remote server specified in the Remote Log IP Address and
Remote Log Port fields.
- Remote Log IP Address The host IP address where
syslog messages should be sent. Remote host should
be configured properly to receive syslog protocol
messages.
- Remote Log Port 1@'+13#FG#+C=.)+=B+)@'+@=;)+;6;2=&+
messages should be sent. 514 is the default port for
the commonly used system message logging utilities.
Every logged message contains at least a System Time
and a Host Name. Usually a particular service name which
generates the system event is specified also within the
message. Messages from different services have different
context and different level of the details. Usually error,
warning or informational system service messages are
.'C=.)':*+@=H'/'.+8=.'+:')742':+5'-A&+2'/'2+8';;7&';+
can be reported also. The more detailed system messages
are reported, the greater volume of log messages will be
generated.
Device Discovery
Enable Discovery Enables device discovery, allowing the
AirRouter HP to be discovered by other Ubiquiti Networks’
:'/49';+)@.=A&@+)@'+-A42)L4(+5'/49'+54;9=/'.6+)==2>+
''$“Discovery” on page 44.