User guide

6
Chapter 4: Main Tab
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
Chapter 4: Main Tab
The Main tab displays status/statistical information and
provides video and client monitoring links.
Status
Device Name Displays the name (ID) of the airCam Dome.
The Device Name can be modified on the System tab.
Version Displays the version of the airVision software
installed.
Uptime This is the total time the airCam Dome has been
running since last power up (reboot) or software upgrade.
The time is displayed in days, hours, minutes and seconds.
Date Displays the current system date and time. The
date and time are displayed in YEAR-MONTH-DAY
HOURS:MINUTES:SECONDS format. The system date and
time is retrieved from the Internet using NTP (Network
Time Protocol). The NTP Client is enabled by default on
the Services tab. The device doesn’t have an internal clock
and the date and time may be inaccurate if the NTP Client
is disabled or the device isn’t connected to the Internet.
MAC Address Displays the Media Access Control (MAC)
address of the airCam Dome.
LAN Indicates the current status of the Ethernet port
connection. This can indicate when a cable is not plugged
into a device or if there is no active Ethernet connection.
When a cable is plugged in and connected properly to
another device, the negotiated data rate and duplex are
displayed.
SD Card Displays the amount of space used and the total
capacity of the microSD card.
Video Settings Displays the bit rate, frame rate, and
refresh frequency. These settings are editable on the Video
tab. Refer to “Video Settings” on page 11 for details.
Monitor
Live View
Displays a live video view based on the settings
configured on the Video tab.