User guide

3
Chapter 2: Installation
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
7. Connect an Ethernet cable to the Ethernet port on the
camera.
8. Connect the other end of the Ethernet cable to the
Ethernet port labeled POE on the PoE Adapter.
9. Connect an Ethernet cable from your LAN to the
Ethernet port labeled LAN on the PoE Adapter.
10. Connect the power cord to the power port on the PoE
Adapter. Connect the other end of the power cord to
a power outlet. The Power LED should light up on the
airCam Dome.
11. Set the ceiling tile into place and hardware installation
is complete.