User guide

18
Chapter 7: Services Tab
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
Dynamic DNS
Enable Dynamic DNS Select this check box to enable
Dynamic DNS service for the airCam Dome. Dynamic DNS
is a network service providing which allows real-time
notification to the DNS Server of any changes occurring
in the airCam Dome’s IP setting, there by allowing access
to the airCam Dome through a Domain Name even if the
airCam Dome’s IP address has changed.
Host Name Defines the Dynamic DNS Host Name. A large
list of Dynamic DNS services is available here.
Username Defines the Dynamic DNS Username.
Password Defines the Dynamic DNS password. Select
Show to display the password.
System Log
Enable Log This option enables the registration routine
of the system log messages. By default it is disabled.
• Enable Remote Log Enables the syslog remote sending
function while System log messages are sent to a
remote server specified in the Remote Log IP Address and
Remote Log Port fields.
- Remote Log IP Address The host IP address where
syslog messages should be sent. Remote host should
be configured properly to receive syslog protocol
messages.
- Remote Log Port The TCP/IP port of the host syslog
messages should be sent. 514 is the default port for
the commonly used system message logging utilities.
Every logged message contains at least a System Time
and a Host Name. Usually a particular service name which
generates the system event is specified also within the
message. Messages from different services have different
context and different level of the details. Usually error,
warning or informational system service messages are
reported, however more detailed Debug level messages
can be reported also. The more detailed system messages
are reported, the greater volume of log messages will be
generated.