User guide

12
Chapter 5: Video Tab
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
Scheduled Record
Allows you to define a schedule for recording. Select
which days that you want scheduled recording enabled
and a start and end time.
Creating a Scheduled Recording
1. Select Scheduled Record.
2. Click Add New Row.
3. Select the days of the week that you want recording
enabled by placing a check mark underneath the day.
4. Enter the start time and stop time in 24-hour format.
5. Select Enabled.
6. Click Set.
7. Click Change.
8. Click Apply.
Deleting a Scheduled Recording
1. Click on an existing row.
2. Click Delete.
3. Click Yes when prompted “Are you sure you want to
delete schedule event?”.
4. Click Change.
5. Click Apply.
Motion Record
Select Full Frame Selects the entire camera frame for
motion detection.
New Selection Allows you to select a specific area of the
frame for motion detection. Click and hold the area of the
image that you want to select. Drag and adjust the box to
select the area where you want to detect motion.
Sensitivity Use the slider to adjust the sensitivity of the
motion detection. Sensitivity values range from 100 to
1. Higher numbers increase the sensitivity, requiring less
motion to trigger a recording.
Higher Sensitivity
Less Motion Required
Lower Sensitivity
More Motion Required
Enabling Motion Recording
1. Select Motion Record.
2. Click New Selection (or Select Full Frame to select the
entire image).
3. To define the motion detection area, click and drag to
create the motion detection frame. To adjust the size
of the frame, place the mouse over a mid or end point
and then click and drag. To move the frame position,
click and drag an area of the motion detection frame
that is not a mid or end point.
4. Select the Sensitivity level. Higher numbers increase the
sensitivity, requiring less motion to trigger a recording.
5. Click Change.
6. Click Apply.
SD Card
X of X available Displays the amount of space used and
the total capacity of the microSD card.
Search Allows you to search recordings for specific search
criteria. Any text that is entered is used as real-time search
criteria and anything that doesn’t match the entered
characters will be removed from the view. Delete the
search string to return to a normal view.