User guide

Chapter 5: Video Tab

Ubiquiti Networks, Inc.

airCam

™

Dome User Guide

Chapter 5: Video Tab

The Video tab allows you to configure basic Video Settings

including the Bit Rate, Quality Frame Rate, and Refresh

Frequency settings for the airCam Dome. If you are

using an optional microSD card (not included), you can

configure Video Recording and SD card options from this

screen.

Using a microSD Card

You can record video on a microSD card. The recording

options for recording on the microSD card are completely

separate from the airVision software recording options.

microSD card recording is configurable only in the Camera

Configuration Interface.

If you need to insert a microSD card and haven’t installed

your airCam Dome yet, refer to “Installation” on page 2.

If you’ve already installed your airCam Dome but need to

remove the airCam Dome Camera Base from the Bezel to

insert a microSD card, perform the following steps:

1. Align the indicator on the Camera Base with the arrow

on the Bezel.

Arrow on bezel

Align

Indicator on Camera Base

2. Remove the airCam Dome Base from the Bezel.