User guide

8
Chapter 4: Main Tab
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
Release DHCP client information can be released
manually by clicking Release.
Refresh DHCP client information can be refreshed
manually by clicking Refresh.
ARP Table
Lists all the entries of the Address Resolution Protocol
(ARP) table currently recorded on the airCam Dome.
ARP is used to associate each IP address to the unique
hardware Media Access Control (MAC) address of each
device. It is important to have unique IP addresses for each
MAC address or else there will be ambiguous routes in the
network.
IP Address Displays the assigned IP address.
MAC Address Displays the Media Access Control (MAC)
address of the device.
Interface Displays the interface that the device is on.
Refresh The information in the ARP Table window can be
updated by clicking Refresh.
Log
Lists all registered system events. By default, logging is not
enabled. The Log can be enabled on the Services tab.
Clear All entries in the system log can be deleted by
clicking Delete.
Refresh System Log content can be updated by clicking
Refresh.