User guide

7
Chapter 4: Main Tab
Ubiquiti Networks, Inc.
airCam
™
Dome User Guide
Camera Controls
Camera controls appear when the mouse pointer is placed
over the Live View image. Use the sliders to adjust the
image settings.
Brightness Use the slider to adjust the image brightness.
Contrast Use the slider to adjust the image contrast.
Saturation Use the slide to adjust the color saturation of
the image.
Sharpness Use the slider to adjust the image sharpness.
Noise Reduction Use the slider to adjust the noise
reduction setting.
Flip Check this option to flip the image upside down.
Mirror Check this option to reverse the image
horizontally.
Save Click to save the camera settings.
Reset Click to reset to the camera default settings.
Connected Clients
Displays a list of clients that are currently viewing the
video stream.
Protocol Displays the protocol being used to connect.
IP Address Displays the IP address of the client.
Port Displays the port being used by the client.
Throughput
Throughput displays a visual representation of the
current data traffic on the LAN port in both graphical
and numerical form. The chart scale and throughput
dimension (Bps, Kbps, Mbps) changes dynamically
according to the mean throughput value. The statistics are
updated automatically.
Refresh Throughput statistics can be updated manually
by clicking Refresh.
DHCP Client
Shows the device’s IP Address, Netmask, Gateway, DNS
Servers, DHCP Server, Domain, Total Lease Time and
Remaining Lease Time. DHCP Client mode can be enabled
on the Network tab.
IP Address Displays the IP address of the airCam Dome
while operating in DHCP Client mode. It is assigned
automatically by the DHCP server.
Netmask Displays the netmask of the airCam Dome
when operating in DHCP Client mode. It is assigned
automatically by the DHCP server, which also assigns the
IP address to the airCam Dome.
Gateway Displays the gateway of the airCam Dome
when operating in DHCP Client mode, which is assigned
automatically by the DHCP server.
Primary/Secondary DNS IP Domain Name System (DNS)
is an Internet “phone book” which translates domain
names to IP addresses. These fields identify the server IP
addresses that the airCam Dome uses for translation. It is
assigned automatically by the DHCP server.
DHCP Server Displays the IP address of the DHCP Server
assigning the IP address to the airCam Dome.
Domain Displays the domain name.
Total Lease Time Shows the total time (validity) of the
leased IP address assigned by the DHCP server.
Remaining Lease Time Displays the remaining time of
the IP address leased by the DHCP server.
Renew DHCP client information can be renewed
manually by clicking Renew.