Security Camera Camera Configuration Interface
airCam™ Dome User Guide Table of Contents Table of Contents Chapter 1: Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 System Requirements . . . . . . . . . . . . . . . . .
airCam™ Dome User Guide Table of Contents Chapter 8: System Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Date Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 System Accounts. . . . . . . . . . . . . . .
airCam™ Dome User Guide Chapter 1: Product Overview Chapter 1: Product Overview Thank you for purchasing the airCam™ Dome, by Ubiquiti Networks. Hardware Overview Removable Lens Cover This User Guide is designed to provide instructions about the installation of the airCam Dome and to provide details about how to install the camera and use the camera configuration interface. The airCam Dome includes the airVision™ software.
airCam™ Dome User Guide Chapter 2: Installation Chapter 2: Installation 4. Insert the airCam Dome Base into the Bezel. The airCam Dome is designed to be mounted in a ceiling. Perform the following steps to install the airCam Dome. Installation 1. (Optional) Insert a microSD card into the slot on the side of the camera until it locks into the slot. 5. Align the indicator on the camera with the arrow on the bezel. Align Arrow on Bezel To remove the microSD card, push the card in to release the lock.
airCam™ Dome User Guide 7. Connect an Ethernet cable to the Ethernet port on the camera. Chapter 2: Installation 10. Connect the power cord to the power port on the PoE Adapter. Connect the other end of the power cord to a power outlet. The Power LED should light up on the airCam Dome. 8. Connect the other end of the Ethernet cable to the Ethernet port labeled POE on the PoE Adapter. 11. Set the ceiling tile into place and hardware installation is complete. 9.
airCam™ Dome User Guide Chapter 3: Using the Camera Configuration Interface Chapter 3: Using the Camera Configuration Interface 5. The Main screen will appear and you should see a live stream of video from the airCam Dome. The airCam Dome has a browser-based Camera Configuration Interface for advanced camera management options. The Camera Configuration Interface is accessible from the airVision software by clicking on the Hostname of the camera in the Device tab.
airCam™ Dome User Guide Chapter 3: Using the Camera Configuration Interface • Services The Services tab covers the configuration of system management services including Ping Watchdog, SNMP Agent, Web Server, SSH Server, Telnet Server, NTP Client, Dynamic DNS, and System Log. For detailed information, refer to “Services Tab” on page 16. • System The System tab contains controls for the airCam Dome Device Settings, Date Settings, System Accounts, Configuration Management and Device Maintenance.
airCam™ Dome User Guide Chapter 4: Main Tab The Main tab displays status/statistical information and provides video and client monitoring links. Status Chapter 4: Main Tab LAN Indicates the current status of the Ethernet port connection. This can indicate when a cable is not plugged into a device or if there is no active Ethernet connection. When a cable is plugged in and connected properly to another device, the negotiated data rate and duplex are displayed.
airCam™ Dome User Guide Camera Controls Camera controls appear when the mouse pointer is placed over the Live View image. Use the sliders to adjust the image settings. Brightness Use the slider to adjust the image brightness. Contrast Use the slider to adjust the image contrast. Saturation Use the slide to adjust the color saturation of the image. Sharpness Use the slider to adjust the image sharpness.
airCam™ Dome User Guide Chapter 4: Main Tab Release DHCP client information can be released manually by clicking Release. Refresh DHCP client information can be refreshed manually by clicking Refresh. ARP Table Lists all the entries of the Address Resolution Protocol (ARP) table currently recorded on the airCam Dome. ARP is used to associate each IP address to the unique hardware Media Access Control (MAC) address of each device.
airCam™ Dome User Guide Chapter 5: Video Tab The Video tab allows you to configure basic Video Settings including the Bit Rate, Quality Frame Rate, and Refresh Frequency settings for the airCam Dome. If you are using an optional microSD card (not included), you can configure Video Recording and SD card options from this screen. Chapter 5: Video Tab 1. Align the indicator on the Camera Base with the arrow on the Bezel.
airCam™ Dome User Guide Chapter 5: Video Tab 3. Insert a microSD card into the slot on the side of the camera until it locks into the slot. 6. Gently push the camera into the Bezel and turn with one motion as shown below. Rotate the camera to the desired position. 4. Insert the airCam Dome Base into the Bezel. Formatting the microSD Card 1. Go to the Video tab. 2. Click Format Memory Card. 5. Align the indicator on the camera with the arrow on the bezel. 3. You will be prompted to confirm. Click OK.
airCam™ Dome User Guide Removing the microSD Card Chapter 5: Video Tab Video Settings 1. Go to the Video tab. 2. Click Remove Memory Card. Bit Rate, Kbit/s This option allows the selection of the bit rate in kilobits per second. Options include 256, 512, 1024, 2048, 4096. Frame Rate, fps This option allows the selection of the video frame rate in frames per second. Options include 2, 3, 4, 5, 7, 10, 15, 20, 25, 30.
airCam™ Dome User Guide Scheduled Record Chapter 5: Video Tab Select Full Frame Selects the entire camera frame for motion detection. New Selection Allows you to select a specific area of the frame for motion detection. Click and hold the area of the image that you want to select. Drag and adjust the box to select the area where you want to detect motion. Allows you to define a schedule for recording. Select which days that you want scheduled recording enabled and a start and end time.
airCam™ Dome User Guide Chapter 5: Video Tab Format Memory Card Use this option to format a new microSD card. Remove Memory Card Use this option to safely remove a microSD card. Name Displays the name of the recording. Place the cursor over the file name to see a preview image from the recording. Double‑click the name to download the file to your computer. Once the file downloads to the computer you can open it with a video player that supports .avi files.
airCam™ Dome User Guide Chapter 6: Network Tab Chapter 6: Network Tab • Static Select this option to assign a static IP address to the airCam Dome. The Network tab covers the configuration of the Network Settings, TCP Explicit Congestion Notification, and Advanced Ethernet Settings. Network Settings IP Address The airCam Dome can obtain an IP address automatically from a DHCP server or be configured with a static IP address. By default, the camera looks to obtain an IP address automatically.
airCam™ Dome User Guide -- Primary DNS IP Enter the IP address of the Primary DNS (Domain Name System) server. -- Secondary DNS IP Enter the IP address of the Secondary DNS (Domain Name System) server. This entry is optional and only used if the primary DNS server is not responding. MTU Enter the size (in bytes) of the largest protocol data unit the layer can pass on. When using slow links, large packets can cause some delays thereby increasing lag and latency. By default, the MTU is set to 1500 bytes.
airCam™ Dome User Guide Chapter 7: Services Tab The Services tab covers the configuration of system management services including Ping Watchdog, SNMP Agent, Web Server, SSH Server, Telnet Server, NTP Client, Dynamic DNS, and System Log. Ping Watchdog Ping Watchdog sets the airCam Dome to continuously ping a user defined IP address (it can be the Internet gateway for example). If it is unable to ping under the user defined constraints, the airCam Dome will automatically reboot.
airCam™ Dome User Guide Chapter 7: Services Tab SNMP Agent SSH Server Simple Network Monitor Protocol (SNMP) is used in network management systems to monitor network‑attached devices for conditions that warrant administrative attention. The airCam Dome contains an SNMP agent which allows it to communicate to SNMP manage applications for network provisioning.
airCam™ Dome User Guide Chapter 7: Services Tab Dynamic DNS Enable Dynamic DNS Select this check box to enable Dynamic DNS service for the airCam Dome. Dynamic DNS is a network service providing which allows real-time notification to the DNS Server of any changes occurring in the airCam Dome’s IP setting, there by allowing access to the airCam Dome through a Domain Name even if the airCam Dome’s IP address has changed. Host Name Defines the Dynamic DNS Host Name.
airCam™ Dome User Guide Chapter 8: System Tab Chapter 8: System Tab Date Settings The System tab contains controls for the airCam Dome Device Settings, Date Settings, System Accounts, Configuration Management, and Device Maintenance. Device Device Name (Host name) is the system wide device identifier. It is reported by the SNMP Agent to authorized management stations. Device Name will be represented in popular Router Operating Systems registration screens and discovery tools.
airCam™ Dome User Guide Key button Press this button in order to change the administrator password. • Current Password Enter the current password associated with the administrator account. It is required to change the Password or Administrator Username. • New Password Enter the new password for the administrator account. • Verify New Password Re-enter the new password for the administrator account. Note: Password length is 8 characters maximum, passwords exceeding 8 characters will be truncated.
airCam™ Dome User Guide 4. Select the firmware file and click Open. Chapter 8: System Tab 8. Once the firmware has been updated the Firmware Update window will close and the login screen will appear. Login and verify the firmware version. 5. Click Upload. 6. The Current Firmware Version and Uploaded Firmware Version will appear. Click the Update button to proceed with the firmware upgrade routine (new firmware image should be uploaded into the system first).
airCam™ Dome User Guide Appendix A: Specifications Appendix A: Specifications airCam Dome Specifications Dimensions 100 x 94 mm (length x diameter) Weight 184 g Ports (1) 10/100 Ethernet, microSD Card Slot Sensor Progressive Scan RGB CMOS ¼" Lens 1.96 mm/F2.0 Horizontal of View 90° Power LED Orange Link/Active LED Green Buttons Factory Reset Button Power Method Passive Power over Ethernet (12-24V) Power Supply 24V/0.5A PoE Adapter included Maximum Power Consumption 3.
airCam™ Dome User Guide Appendix B: Safety Notices Appendix B: Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
airCam™ Dome User Guide Appendix C: Warranty General Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) represents and warrants that the Products furnished hereunder shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
airCam™ Dome User Guide Appendix D: Compliance Information Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer’s responsibility to make sure the device is operated within local country regulatory requirements.
airCam™ Dome User Guide RoHS/WEEE Compliance Statement Appendix D: Compliance Information detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto. Français European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/ or its packaging must not be disposed of with unsorted municipal waste.
airCam™ Dome User Guide Appendix E: Declaration of Conformity Česky [Czech] Dansk [Danish] Nederlands [Dutch] UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Undertegnede UBIQUITI NETWORKS erklærer herved, at følgende udstyr UBIQUITI NETWORKS device, overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
airCam™ Dome User Guide Appendix F: Contact Information Appendix F: Contact Information Ubiquiti Networks Support Ubiquiti Support Engineers are located in the U.S. and Europe and are dedicated to helping customers resolve software, hardware compatibility, or field issues as quickly as possible. We strive to respond to support inquiries within a 24 hour period. Email: support@ubnt.com Phone: 408-942-1153 (9 a.m. - 5 p.m. PST) Online Resources Wiki Page: www.ubnt.com/wiki Support Forum: www.ubnt.
