User's Manual

28
airFiber® AF5/AF5U Quick Start Guide
3. Master Visually aim the Master at the Slave. To adjust the
Master's position:
a. Rotate the airFiber radio on the pole to align the azimuth.
b. Use the hex nut on the Elevation Rod to adjust the elevation.
Note: Do NOT make simultaneous adjustments on the
Master and Slave.
4. Slave Visually aim the Slave at the Master. To adjust the Slave's
position:
a. Rotate the airFiber radio on the pole to align the azimuth.
b. Use the hex nut on the Elevation Rod to adjust the elevation.
5. Check to see if a link is established. Ensure that the Link Status
LED is solidly lit green and the Remote and Local LED Displays of
the Slave are displaying signal levels.