User's Manual

1
Introduction
Introduction
Thank you for purchasing the Ubiquiti Networks
™
airFiber® 5GHz
Point-to-Point 1.0+ Gbps Radio. This Quick Start Guide is designed
to guide you through the installation, show you how to access
the airFiber Configuration Interface, and explain how to set up
an airFiber link. This Quick Start Guide also includes the warranty
terms and is for use with the following models:
Model Description Operating Frequency*
AF5 Supports mid-band frequencies 5470 - 5950 MHz
AF5U Supports high-band frequencies 5725 - 6200 MHz
* Refer to the Specifications section for more information.
Package Contents
airFiber AF5 I-Bracket Upper Mount Bracket
with Elevation Rod
Lower Mount
Bracket
Pole Clamps
(Qty. 2)
M10x150 Carriage
Bolts (Qty. 4)
M10x100 Carriage
Bolts (Qty. 2)
M8x14 Serrated
Flange Bolts (Qty. 4)
Azimuth Support Brackets
(Qty. 2)
Flat Washers
(M10, Qty. 6)
Lock Washers
(M10, Qty. 6)
Hex Nuts
(M10, Qty. 6)
5 GHz Point to Point
1+ Gbps Radio
Models: AF5, AF5U
Cable Ties
(Qty. 2)
GigE PoE Adapter
(50V, 1.2A)
Power Cord Quick Start Guide
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable
™
is designed for
outdoor installations. It is the customer’s responsibility to follow local country regulations, including
operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS)
requirements.