User's Manual

24
airFiber® AF5/AF5U Quick Start Guide
3. Connect the other end of the Ethernet cable from the Data
port to the Ethernet port labeled POE on the GigE PoE Adapter.
4. Connect an Ethernet cable from your network to the Ethernet
port labeled LAN on the GigE PoE Adapter.
5. Connect the Power Cord to the power port on the GigE PoE
Adapter. Connect the other end of the Power Cord to a power
source.
Note: For added protection, we recommend installing two
GigE PoE surge protectors. Install the first surge protector
within 1 m (3.28 ft) of the airFiber Data port, and install the
second surge protector at the ingress point of the location
housing the wired network equipment.