User's Manual

63
Appendix F: Compliance InformationairFiber X User Guide
Ubiquiti Networks, Inc.
Frequency Ranges and Power Levels
per Country/Region
airFiber AF-2X
The product can be operated in the countries and regions
listed in the following table, within the stated frequency
ranges and output power (EIRP)limits.
Each country has its own power level and frequency
regulations. To ensure the product operates under the
necessary regulatory compliance rules, the country
where the device will be used must be selected during
installation. The frequency settings and output power
(EIRP) limits will be tuned according to the regulations of
the selected country/region:
Country/Region
Frequency Range
(Band Edges in MHz)
Max. EIRP (dBm)
Argentina 2400-2483 36
Australia 2400-2483 36
Bahrain 2400-2483 36
Brazil 2400-2483 36
Canada 2400-2483
36*
Chile 2400-2483 36
China 2400-2483 36
Colombia 2400-2483 36
Ecuador 2400-2483 36
Ghana 2400-2483 36
Guam
(U.S. territory)
2400-2483
36*
Hong Kong 2400-2483 36
Indonesia 2400-2483 36
India 2400-2483 36
Kenya 2400-2483 36
Korea Republic 2400-2483 36
Kyrgyzstan 2400-2483 Not applicable
Malaysia 2400-2483 36
Mexico 2400-2483 36
New Zealand 2400-2483 36
Nigeria 2400-2483 36
Peru 2400-2483 36
Philippines 2400-2483 36
Puerto Rico
(U.S. territory)
2400-2483
36*
Singapore 2400-2483 36
South Africa 2400-2483 36
Taiwan 2400-2483 36
Tajikistan 2400-2483 Not applicable
Thailand 2400-2483 20
Turkmenistan 2400-2483 Not applicable
Uganda 2400-2483 Not applicable
United States 2400-2483
36*
Uzbekistan 2400-2483 Not applicable
Venezuela 2400-2483 36
Virgin Islands
(U.S. territory)
2400-2483
36*
Vietnam 2400-2483 36
* A higher EIRP is possible based on FCC Part 15 requirements
of reduction of conducted power by 1dBm per 3dBi increase of
antenna gain beyond 6dBi.