User's Manual

47
Appendix B: AF-5X and airFiber MultiplexerairFiber X User Guide
Ubiquiti Networks, Inc.
3. Secure the airFiber NxN Multiplexer to the 4x4 Radio
Bracket using two M4x12 Screws.
Note: Ensure the airFiber 5X radios are
preconfigured and the ground wires are installed
as outlined in the radio’s Quick Start Guide
before mounting the radios.
4. Mount the airFiber 5X radios to the 4x4 Radio Bracket:
a. Align the mounting tabs on the back of the radio
with the mounting bracket.
b. Slide the radio down to lock it into place.
Ubiquiti Networks, Inc. www.ubnt.com
Ubiquiti Networks, Inc. www.ubnt.com
5. Mount the airFiber 5X radios to the 8x8 Radio Bracket:
a. Align the mounting tabs on the back of the radio
with the mounting bracket.
b. Slide the radio down to lock it into place.
Ubiquiti Networks, Inc. www.ubnt.com
Ubiquiti Networks, Inc. www.ubnt.com
6. Connect the RF Cables to the airFiber 5X radios.
Connect each RF Cable pair to the corresponding
RFconnection chain on each radio. For example,
connect cable A0 to Chain 0, and cable A1 to Chain 1.