User's Manual
Installation Overview
We recommend that you configure your paired AF-11FX radios
before site installation. The overview below summarizes the
installation procedure, and the subsequent sections provide
detailed installation information.
• Install the Duplexer(s) in the AF-11FX radio.
• Connect power (PoE or DC) to the AF-11FX and connect your
computer to the MGMTport.
• Configure the AF-11FX.
• Install a ground wire and mount the AF-11FX on the
airFiber AF-11G36 antenna (or a compatible antenna).
• At the installation site, install the antenna with the mounted
AF-11FX radio (see the antenna’s Quick Start Guide for
installation instructions).
• Establish and optimize the RF link.
Installing the Duplexer
Install the included Duplexer as follows:
1. Loosen the screw on top of the Duplexer Shroud and
remove the Duplexer Shroud.