User's Manual

Ports
Reset
Button
Management
Port
Data
Port
VDC
Management Port 10/100 Mbps, secured Ethernet port for
configuration. In-Band Management is enabled by default
in the airFiber Configuration Interface. When In-Band
Management is disabled, the MGMT port is the only port that
can monitor, configure, and/or update firmware.
Reset Button To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the device is
already poweredon.
Data Port Gigabit PoE port for handling all user traffic and
powering the device.
VDC The VDC terminal block, labeled (+) and (-), is used to
power the AF-11FX using 50VDC instead of PoE.