User's Manual

2. Insert the TX and RX ports of the Duplexer into the TX0 and
RX0 ports of the AF-11FX radio.
3. If you will be using the AF-11FX in SISO mode, go to step 5.
4. To use the AF-11FX in MIMO mode:
a. Attach the second Duplexer (not included) to the
AF-11FX radio’s TX1 and RX1 ports.
Note: The Duplexers must be installed in reverse order
on opposite sides of the link.
b. Remove the cap on the top right side of the AF-11FX.
5. Re-attach the Duplexer Shroud to the AF-11FX radio.