Quick Start Guide

7
Accessing the Configuration Interface
Configuring PoE Settings
The PoE settings are set to Off by default.
WARNING: Before activating PoE, ensure that the connected
device supports passive PoE and the supplied voltage.
1. On the Status tab, click the Ports tab.
2. On the Ports tab, select the Ethernet port you want to
configure. Select the appropriate PoE Status setting, and then
click Save Changes.
The PoE LED on the Ethernet port will confirm the PoE setting.
For detailed instructions on configuring other features, please
refer to the TOUGHSwitch PoE User Guide. The User Guide is
available at documentation.ubnt.com/toughswitch