User`s guide

T10C User Guide
28
5. Plug the other end of the power cord to a live wall outlet, at the
same time, the Power LED at front panel lights up.
-- For the power supply of this equipment, an approved power cord has
to be used.
-- Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
-- Remove all power from the device prior to installing or removing any
accessories, hardware, or cables
-- Before cleaning the system, make sure it is disconnected from
any external power supplies (i.e. AC adapter).
2.2.3.Starting Your System
The Power/Resume button is found on the right side of the Tablet PC.
Press the Power/Resume button to start your system and check that if
the Power LED turns on.
After a few seconds, the system’s display will turn on and your system
will begin to execute the Power On Self Test or POST to check if all
system components are running properly. Any error found during the
test will be displayed on the screen.
After the test, the screen will also display a message "press <F2> to
enter SETUP". You don’t need to run this program at the moment as
your dealer already made the necessary settings for your computer