INTRODUCTION as Ambient Light Menu Button Sensor Package List Caw € Device * Status Indicator i Micro USB 1 +1-Micro USB 2 + Power Button [ @ stand * Depending on the specific mode! purchased. @ Please note, ably dairy cable as we provided can support data transmission. Some other cables may not work when connecting the PC Tools. 01 © microwave USB cable® ENGLISH Micro USB 1 Used for USB power supply, external DS18B20 probe (optional extra), or PC connectivity.
TECHNICAL SPECIFICATIONS ENGLISH WiFi: 2.4GHz, Flame resistant ABS batteries (not included) or Micro USB power (DC 5V/2A)® 143g13g, not including batteries x 3.38" 2 x Micro USB {one with optional embedded RS485 interface) @_Supports Micro SIM card (15mm x 12mm x 0.8mm) * = Supports up to 2 DS18B20 temperature probes (optional extra) O Optimal operation and storage conditions: -20 to 60°C, condensation) @ The device can preferentially use USB power If both USB and batteries are available.
DEVICE OPERATIONS ENGLISH Switch On Press and hold the power button for 3 seconds until the screen is lit up. Release the button and the device is now on. Switch Off Press and hold the power button for 3 seconds. The indicator will flash red once and the device is now off. Device Setup Mode With the device switched on, press and hold the menu button for 3 seconds. Release the button when the indicator flashes alternately red and green and the AP icon will display on the screen.
DEVICE OPERATIONS ENGLISH -Manual Data Synchronization With the device switched on, press the power button once to trigger a manual data sync. There is a voice guide of "data synchronizing". The voice guide will be "sync completed " while the data is being transferred. If the server cannot be contacted, the voice guide will be "sync failed". +Switch On/Off Voice Guide ® Press the menu button twice in quick succession to enable or disable the voice guide. This will also refresh the last sensing data.
DATA SYNC MODES* | 1 Sync via WIFI The device supports data sync aver WiFi using 2.4GHz, channels 1-13. i Automatic Network Selection The device can preferentially connect to WiFi if both WiFi and mobile data are available. * Depending on the specific model purchased 06 ENGLISH 2 sync via Mobile Data * oe The device includes a SIM card slot to allow mobile data sync if WiFi is unavailable. Direct Data Access without Network The device continues to collect data even without a network connection.
DEVICE SETUP OPTIONS ENGLISH Option 1: Using Mobile App Download the App from Or Search for “Ubiquity” on the App Store or Google Play. ta mobile phone compatibility. The PC Tools Is much leaser to operate and suitable for both Macs (1) ‘We recommend you try ta use the PC Tools when the App setup fails, because the failure may be due and Windows. Option 2: Using PC Tools Download the tool from “This Tool is a desktop app for device setup.
SETUP USING THE APP FOR WiFi CONNECTION ENGLISH Launch the App and log in. On the home page, tap the to start adding your device. Then please follow the in-app instructions to complete the setup. You can also view the demonstration video at for step by step guidance. eld yer divine Stu the OF eerie & Via our app and web console you are able to view the sensor readings as well as configure your device, such as create alert rules, set data sync interval, stc.
SETUP USING THE APP FOR MOBILE NETWORK * ENGLISH Before you set up the device on mobile data, please check the APN information of the SIM card used for the Ubiquity device. An APN (Access Point Name) provides the details your device needs to connect to mobile data through your network operator. APN details differ by network and you will need to get these from your network operator. With the device off, insert the SIM card as indicated in the picture. Launch the app and log in.
SETUP USING PC TOOLS STEP. Launch the App and log in. With the device switched on, use the Micro USB cable provided to connect your device via US BL to the computer. The Tools will automatically scan your device and enter device page. ENGLISH Serena Omani ore | aT 3 STEP. Click “Network” on the left menu bar. There you are able to set up the device on WiFi or mobile data.
TROUBLESHOOTING ENGLISH 1. Device setup failure when using the Ubiquity App (Error code 04) There are several factors that can affect the setup. The followings are common issues: (@ WiFi frequency: The Device can only connect to 2.4GHz networks, channels 1-13. @ WiFi password: Go through the device setup again and ensure that you have set the correct WiFi password for the network. @ WiFi security type: The Device supports OPEN, WEP, or PAWPAW types.
TROUBLESHOOTING ENGLISH 2. Failure to Sync Data (Error code 02/07) Please check the following: @ Check that the device has sufficient battery power for the WiFi to work. WiFi takes a lot of power-the device may be on, but unable to connect to the WiFi. We recommend you use Alkaline batteries or USB power for better device's performance. @ If you are using mobile data, check that your SIM card is activated. If it is, check that your batteries or USB power connection are able to provide 2A current.
TROUBLESHOOTING ENGLISH to. Press the power button once to manually trigger data sync. After the sync completes, you can take the device back to the measurement location (Recommended). @ Use your mobile phone and enable Internet Connection Sharing. This can work well when your devices are installed in an area with limited or no WiFi coverage. ® Use a laptop and the Micro USB cable to connect to the device manually. You can now perform a data export to your computer using the PC Tools.
TROUBLESHOOTING ENGLISH 5. Error code 08: No SIM card Found Please check the SIM card is correctly inserted. 6. Error code 09: Mobile Data Network Failure Please check your SIM card is setup correctly and has been activated. WARRANTY INFORMATION 1. This device is warranted ta be free of defects in materials and workmanship for a period of up to one year from the original purchase date.
TECHNICAL SUPPORT ENGLISH The Ubiquity team is glad to hear your voice of our products and services. For any questions or suggestions, please feel free to create a ticket in the Ubiquity app. Our customer service representatives respond within 24 hours and often in less than an hour. You can also contact the local distributors in your country for localized service. Please go to our website to view their contacts. PRODUCT CARE Please always follow the instructions contained in this manual.
