Introduction + package List: Motion Sensor MS1/MS1P (x1) Mira USB cable (x1) Screw {x2} User Guide {x1} plug gable Terminal Block Connector (M510) {x1} + Product Function: monitor the movement of people or animals and measure the environment temperature and humidity sin Sensor 0 Alt vert dignitary 8 Jr— Button
Technical Specifications Product: Ubiquity Motion Sensor MS1/MS1R Detection distance: 12 meters Detection ang! graphical 40 degrees, horizontal 105 degrees Power supply: Micro USS/POE power supply AL power supply ® Operating temperature M51: Non-condensing Operating humidity M51 s90% 8H, Non condensing Operating temperature MIP 0h 50°C Ingratiating humidity MSP: 570% RH ’ Operation system: Androgenic Network: 2.4GHz WIFU/RJ4S Ethernet ® Bluetooth: BT4.
Detection Range Our product uses the hydroelectric infrared sensor, which is featured with a detection distance meters, 40 degrees in vertical direction, and 105 degrees in horizontal direction.
indicator Status & Operations Power on and off: The device will switch on automatically when power is supplied, and shut down automatically when power is off, «i: When the indicator flashes green, it means there is movement detected. When no movement 5 detected, the indicator goes off. 4 ‘When the indicator flashes alternately red and blue, it means the device is in the setup mode, # When the indicator is constantly blue, the device is resetting to default settings.
Power Supply * Power supply: Micro USE [5 2A) POE power supply power supply * (110-240 ¥ ag, 50/60 Hz) Micro USE Interfere POE cable interface ® «Text marked with asterisk means the feature depends on the specific medal purchased.
APP Installation Option © Download the App from Option 2: Search for "UbiBot® on the App Store or Google Play.
Network Setup STEP Launch the App, register if needed, and log in. Tap to add a device. Scan the QR code on the device or manually enter the serial number. STEP 2. Enter the WF] setup mode: in the ON state, press and hold the button for 5 seconds until the Indicator flashes alternately red and blue. STEP 3. Turn on your phone's Bluetooth first. According to the prompt In the APR fill in the current WIFI password and tap “Next Step”. After the progress bar is completed, the setup finishes.
Device Installation This product is a wall mounted type, and the best performance can be achieved when the deployment position maters high, measured from the floor.
Notes For batter monitoring results, please pay attention to the following when deploying the device: + Go not face glass doors and windows; + Av old facing large solecisms that are prone Io swinging, such as wees and tall shrubs; + Should not be opposite to any hot of cold vents or Sources; = Keep away from alr conditioners, refrigerators, stoves, and all places where alr temperature can easily fluctuate.
Warranty information This device is warranted to be free of defects in materials and workmanship for a period of up to one year from the original purchase data. The following situations are not covered by the warranty: @ Issues arising after the warranty period has ended.
