Programming instructions

180
Intermec Fingerprint 6.13 – Programmer's Guide
17. REFERENCE LISTS, cont'd.
FORMATTING AND PRINTING, cont'd.
Bar Code Printing:
BARFONT[#<ncon>,]<sexp>[,sexp>[,<nexp>[,nexp>[,nexp]]]][ON] BF StmtSpecify bar code interpretation fonts
BARFONT ON BF ONStmtEnable bar code Interpretation
BARFONT OFF BF OFFStmtDisable bar code interpretation
BARHEIGHT<nexp> BH StmtBar code height
BARMAG<nexp> BM StmtBar code magnification
BARRATIO<nexp>,<nexp> BR StmtWide/narrow bar ratio
BARSET[#<ncon>,][<sexp>[,<nexp>[,<nexp>[,<nexp>[,<nexp>[,<nexp>
[,<nexp>[,<nexp>[,<nexp>[,<nexp>[,<nexp>]]]]]]]]]]] StmtSpecifying complex bar codes
BARTYPE<sexp> BT StmtBar code type
MAG<nexp>,<nexp> StmtMagnification of barfont
PRBAR<<sexp>|<nexp>> PB StmtInput data to bar code field
Image and Graphics Printing:
INVIMAGE II StmtInverse image printing
MAG<nexp>,<nexp> StmtMagnification of image
NORIMAGE NI StmtReturn to normal image printing
PRBOX<nexp>,<nexp>,<nexp> PX StmtCreate a box
PRIMAGE<sexp> PM StmtSelect a preprogrammed image
PRLINE<nexp>,<nexp> PL StmtCreate a line
Printing and Paper Feed Control:
ACTLEN FuncRead length of last paper feed
CLEANFEED<nexp> StmtRunning the printer's feed mechanism
CLL[<nexp>] StmtClear print buffer
CUT StmtActivate optional cutting device
CUT <nexp> ON|OFF StmtEnable/disable automatic cut-off
FIELDNO FuncGet current field number for CLL
FORMFEED[<nexp>] FF StmtPaper feed
LBLCOND<nexp>,<nexp> StmtOverriding paper feed setup
LTS& ON|OFF StmtEnable/disable label taken sensor
OPTIMIZE[<sexp>] ON|OFF StmtEnable/disable optimizing for batch printing
PRINT KEY ON|OFF StmtEnable/disable
PRINTFEED using Print key
PRINTFEED<nexp> PF StmtPrint and feed out label or batch of labels
PRINTFEED NOT PF NOTStmtPrepare printing
TESTFEED StmtAuto adjustment of label stop sensor
2. Instructions by Field of Application, cont'd.
Instruction Abbr.TypePurpose