Programming instructions

136
Intermec Fingerprint 6.13 – Programmer's Guide
Key Id. Numbers
The keys are specified by identification numbers in connections
with the following statements:
KEY...ON Enables the specified key.
KEY...OFF Disables the specified key.
ON KEY...GOSUB... Branches the program execution to a sub-
routine when the specified key is pressed.
Each key has two id. numbers, one for its unshifted position and
another for its shifted position
1
. By default, the <C> key works as
Shift key (compare with the shift key of a typewriter).
To select the shifted position of a certain key, keep the Shift key
(<C>) depressed while you press the desired key. The id. number
of the shifted key is equal to its unshifted id. number + 100. For
example, the <F1> key has id. number 10 in unshifted position, but
id. number 110 in shifted position.
The illustration below shows the default id. numbers of the key-
boards of the Enhanced models of EasyCoder 201 II and 501/601.
The id. number of the <Print> button or key also applies to printers
models without keyboard, such as Easycoder 201 IIS, EasyCoder
401, Easycoder 501S, and EasyCoder 601S.
If the keyboard is remapped (see later in this chapter), the id.
numbers will be affected.
1. Keyboard, cont'd.
15. PRINTER FUNCTION CONTROL, cont'd.
Continued!
1
/. Due to technical restrictions in the
keyboard decoding, some keys will not
work in Shifted position depending on the
combination of printer model and selected
Shift key.
Power
ErrorReady
EasyCoder
201
IIE