Programming instructions

131
Intermec Fingerprint 6.13 – Programmer's Guide
A large number of commonly used bar code symbologies are
included in the Intermec Fingerprint EPROMs fitted in the first pair
of sockets on the CPU board. As an option, Configuration and
ROM-expansion EPROMs may contain additional bar codes ac-
cording to the customer's request. Bar codes cannot be downloaded
to the printer, but must be ordered from Intermec and “burned” into
EPROMs using e.g. the Toolbox Configuration program.
Some bar codes require special barcode fonts, e.g. UPC and EAN
bar codes.
Bar codes cannot be listed by means of any Intermec Fingerprint
instruction. As standard, Intermec Fingerprint 6.13 contains the
following bar codes.
Bar Code Type Designation
Codabar "CODABAR"
Code 11 "CODE11"
Code 39 "CODE39"
Code 39 full ASCII "CODE39A"
Code 39 w. checksum "CODE39C"
Code 93 "CODE93"
Code 128 "CODE128"
DUN-14/16 "DUN"
EAN-8 "EAN8"
EAN-13 "EAN13"
EAN-128 "EAN128"
Five-Character Supplemental Code "ADDON5"
Industrial 2 of 5 "C2OF5IND"
Industrial 2 of 5 w. checksum "C2OF5INDC"
Interleaved 2 of 5 "INT2OF5"
Interleaved 2 of 5 w. checksum "I2OF5C"
Interleaved 2 of 5 A "I2OF5A"
Matrix 2 of 5 "C2OF5MAT"
MSI (modified Plessey) "MSI"
Plessey "PLESSEY"
Straight 2 of 5 "C2OF5"
Two-Character Supplemental Code "ADDON2"
UCC-128 Serial Shipping Container Code "UCC128"
UPC-5 digits Add-On Code "SCCADDON"
UPC-A "UPCA"
UPC-D1 "UPCD1"
UPC-D2 "UPCD2"
UPC-D3 "UPCD3"
UPC-D4 "UPCD4"
UPC-D5 "UPCD5"
UPC-E "UPCE"
UPC Shipping Container Code "UPCSCC"
Continued!
1. Standard Bar Codes
13. BAR CODES