Programming instructions

Intermec Fingerprint v7.61 – Programmer's Reference Manual Ed. 7 325
Chapter 7
7. Error Messages
0 No error
1 Syntax error.
2 Unbalanced parenthesis.
3 Feature not implemented.
4 Evaluation syntax error.
5 Unrecognized token.
6 Tokenized line too long.
7 Evaluation stack overfl ow.
8 Error in exectab.
9 Undefi ned token.
10 Non-executing token.
11 Evaluation stack underfl ow.
12 Type mismatch.
13 Line not found.
14 Division with zero.
15 Font not found.
16 Bar code device not found.
17 Bar code type not implemented.
18 Disk full.
19 Error in fi le name.
20 Input line too long.
21 Error stack overfl ow.
22 RESUME without error.
23 Image not found.
24 Overfl ow in temporary string buffer.
25 Wrong number of parameters.
26 Parameter too large.
27 Parameter too small.
28 RETURN without GOSUB
29 Error in startup fi le.
30 Assign to a read-only variable.
31 Illegal fi le number.
32 File is already open.
33 Too many fi les open.
34 File is not open.
37 Cutter device not found.
38 User break.
39 Illegal line number.
40 Run statement in program.
41 Parameter out of range.
42 Illegal bar code ratio.
43 Memory overfl ow.
44 File is write protected.
45 Unknown store option.
46 Store already in progress.
47 Unknown store protocol.
48 No store defi ned.
49 NEXT without FOR
50 Bad store record header.
51 Bad store address.
52 Bad store record.
53 Bad store checksum.
54 Bad store record end.
Interpretation Table
Code Message/Explanation Code Message/Explanation
55 Remove in ROM.
56 Illegal communication channel.
57 Subscript out of range.
58 Field overfl ow.
59 Bad record number.
60 Too many strings.
61 Error in setup fi le.
62 File is list protected.
63 ENTER function.
64 FOR without NEXT
65 Evaluation overfl ow.
66 Bad optimizing type.
67 Error from communication channel.
68 Unknown execution entity.
69 Not allowed in immediate mode.
70 Line label not found.
71 Line label already defi ned.
72 IF without ENDIF.
73 ENDIF without IF.
74 ELSE without ENDIF.
75 ELSE without IF.
76 WHILE without WEND.
77 WEND without WHILE
78 Not allowed in execution mode.
79 Not allowed in a layout.
80 Download timeout
81 Exit to system
82 Invalid cont environment
83 ETX Timeout
1001 Not implemented.
1002 Memory too small.
1003 Field out of label.
1004 Wrong font to chosen direction.
1005 Out of paper.
1006 No fi eld to print.
1007 Lss too high.
1008 Lss too low.
1009 Invalid parameter.
1010 Hardware error.
1011 I/O error.
1012 Too many fi les opened.
1013 Device not found.
1014 File not found.
1015 File is read-only.
1016 Illegal argument.
1017 Result too large.
1018 Bad fi le descriptor.
1019 Invalid font.
1020 Invalid image.
1021 Too large argument for MAG.
1022 Head lifted.
1023 Incomplete label.
1024 File too large.