Programming instructions

EAN-128
Code 128
BARTYPE: "CODE128"
BARRATIO: Fixed. BARRATIO statement ignored.
BARMAG: ≥ 2.
BARHEIGHT: No restriction.
BARFONT: No restriction.
INPUT DATA:
No. of characters: Unlimited
Check digit: 1 check digit added automatically.
Input characters: ASCII 0-127 decimal according to Roman 8
character set.
Function characters: FNC1: ASCII 128 decimal
1
FNC2: ASCII 129 decimal
1
FNC3: ASCII 130 decimal
1
FNC4: ASCII 131 decimal
1
Start characters: Added automatically
2
.
Stop character: Added automatically
2
.
1
/. Function characters FNC1-4 require either an 8-bit communication
protocol, remapping to an ASCII value between 0-127 dec., or the use
of an CHR$ function.
2
/. The Intermec Fingerprint fi rmware automatically calculates and inserts
the start, code and shift characters that are required to optimize the code
according to the Code 128 specifi cations.
BARTYPE: "EAN128"
BARRATIO: Fixed. BARRATIO statement ignored.
BARMAG: ≥ 2.
BARHEIGHT: No restriction.
BARFONT: No restriction.
INPUT DATA:
No. of characters: Unlimited.
Check digit: Trailing symbol check character added automati-
cally.
Input characters: ASCII 0-127 decimal according to Roman 8
character set.
Start characters: Added automatically
1
.
Stop character: Added automatically
1
.
1
/. The Intermec Fingerprint fi rmware automatically calculates and inserts
the start, code, and shift characters that are required to optimize the code
according to the EAN 128 specifi cations.
This bar code is identical to Code 128 with the exception that the initial
FNC1 function character is generated automatically.
Intermec Fingerprint v7.61 – Programmer’s Reference Manual Ed. 7 317
Chapter 5 Bar Codes