Specifications

Chapter 6— Finding IPL Commands in This Manual
72 IPL Programmer’s Reference Manual
Commands Listed by Task
This section focuses on the tasks that you will perform with IPL
commands, such as editing bar code fields on a label. Each table presents a
task and lists the IPL commands that you must use to perform that task.
For example, to edit bar code fields while the printer is in Program mode,
you must use all the commands shown in the second table in this section.
Note: This section does not list all the IPL commands, only the
commands that are necessary to perform specific tasks. For a complete list
of commands, see the table of contents, “Commands Listed by Name,” or
“Commands Listed by Syntax” earlier in this chapter.
Some command names in this section have been modified slightly to
indicate exactly how you will use the command to perform the task.
Immediate Commands
System Commands
Syntax Command Page
<BEL>
Error Code, Request 86
<DLE>
Reset 87
<EM>
Abort Print Job 86
<ENQ>
Status Enquiry 89
<VT>
Status Dump 88
<ESC>L
Label and Gap Length, Transmit 87
<ESC>Q
Remaining Quantity and Batch Count, Transmit 87
Program Mode Commands
Bar Code Field Editing Commands
Syntax Command Page
c
Bar Code, Select Type 141
d
Field Data, Define Source 173
f
Field Direction, Define 175
h
Height Magnification of Bar, Box, or UDC, Define 185
i
Interpretive Field, Enable or Disable 190
o
Field Origin, Define 175
p
Code 39 Prefix Character, Define 171
r
Character Rotation or Bar Code Ratio, Define 168
w
Width of Line, Box, Bar, or Character, Define 199