Specifications

Chapter 6— Finding IPL Commands in This Manual
IPL Programmer’s Reference Manual 67
Commands Listed by Name (continued)
IPL Command Syntax Page
Print Speed, Set
<SI>S
132
Printer Language, Select
<SI>l
133
Printhead Loading Mode, Select
<SI>h
135
Printhead Parameters, Transmit
<ESC>H
109
Printhead Pressure, Set
<SI>H
136
Printhead Resistance Test, Begin
B
203
Printhead Resistance Values, Transmit
S
203
Printhead Temperature Sensor Value, Transmit
P
203
Printhead Test Parameters, Set
<SI>U
136
Printhead Volt Supply Value, Transmit
V
204
Program Mode, Enter
<ESC>P
109
Program Mode, Exit
R
197
Program Number, Transmit
<ESC>M
110
Quantity Count, Set
<RS>
110
Reflective Sensor Value, Transmit
M
204
Remaining Quantity and Batch Count, Transmit
<ESC>Q
87
Reset
<DLE>
87
Ribbon Save Zones, Set
<SI>Z
137
Self-Strip, Enable or Disable
<SI>t
137
Slash Zero, Enable or Disable
<SI>z
138
Software Configuration Label, Print
s
204
Start and Stop Codes (Code 39), Print
<ESC><SP>
110
Status Dump
<VT>
88
Status Enquiry
<ENQ>
89
Takeup Motor Torque, Increase
<SI>b
139
Test and Service Mode, Enter
<ESC>T
111
Test and Service Mode, Exit
R
204
Top of Form, Set
<SI>F
139
Transmissive Sensor Value, Transmit
G
204
User-Defined Characters (UDC) and Graphics, Print
g
204
User-Defined Character, Clear or Create
G
197
User-Defined Character Field, Create or Edit
U
197
User-Defined Characters, Transmit
<ESC>u
111
User-Defined Font Character, Create
t
198
User-Defined Fonts, Print
t
205
User-Defined Tables, Transmit
<ESC>Z
112
Warm Boot
<BS>
112
Width of Line, Box, Bar, or Character, Define
w
199