Specifications

Chapter 5— Advanced Printer Programming
IPL Programmer’s Reference Manual 59
IPL Commands and Emulation Mode (continued)
IPL Command Name Syntax Page
Works in
Emulation Mode?
Interlabel Ribbon Save, Enable or Disable <SI>s 123 N/A
Interpretive Field, Edit I 189 Yes
Interpretive Field, Enable or Disable i 190 Yes
Label and Gap Length, Transmit <ESC> L 87 Yes
Label Path Open Sensor Value, Transmit L 202 N/A
Label Rest Point, Adjust <SI>f 123 Yes
Label Retract, Enable or Disable <SI>R 124 Yes
Label Retract Distance, Set <SI>r 124 Yes
Label Stock Type, Select <SI>T 125 Yes
Label Taken Sensor Value, Transmit T 202 Yes
Label Width, Set <SI>W 125 N/A
Length of Line or Box Field, Define l 190 Yes
Line Field, Create or Edit L 191 Yes
Maximum Label Length, Set <SI>L 126 Yes
Media Fault Recovery Mode, Set <SI>e 127 Yes
Media Sensitivity, Select <SI>g 127 Yes
Memory Usage, Transmit <ESC>m 105 Yes
Message Delay, Set <ESC><SYN> 128 Yes
Next Data Entry Field, Select <CR> 106 Yes
Number of Image Bands, Set <SI>I 129 Yes
Numeric Field Separator <FS> 106 Yes
Online or Offline on Power-Up <SI>O 130 N/A
Options Selected, Transmit <ESC>O 107 Yes
Outline Font, Clear or Create J 191 No
Outline Font, Download j 193 No
Page, Create or Edit S 194 No
Page, Delete s 195 No
Page, Select <ESC>G 108 No
Page, Transmit <ESC>y 108 No
Pages, Print p 203 Yes
Pin 11/20 Protocol, Set <SI>p 130 No
Pitch Label, Print C 203 Yes
Pitch Size, Set g 195 No
Point Size, Set k 196 No
Postamble, Set <EOT> 131 Yes
Preamble, Set <SOH> 131 Yes
Print <ETB> 109 Yes