Specifications

Chapter 5— Advanced Printer Programming

58 IPL Programmer’s Reference Manual

IPL Commands and Emulation Mode (continued)

IPL Command Name

Syntax

Page

Works in

Emulation Mode?

Data Source for Format in a Page, Define e 172 No

Direct Graphics Mode, Select <ESC>g 96 No

Emulation Mode, Enter <ESC>c 97 Yes

Emulation or Advanced Mode on Power-Up <SI>C 119 Yes

End-of-Print Skip Distance, Set <SI>D 120 Yes

Error Code, Request <BEL> 86 Yes

Factory Defaults, Reset D 202 Yes

Field, Delete D 172 Yes

Field, Select <ESC>F 97 Yes

Field Data, Define Source d 173 Yes

Field Decrement, Set <ESC>D 98 Yes

Field Direction, Define f 175 Yes

Field Increment, Set <ESC>I 99 Yes

Field Origin, Define o 175 Yes

First Data Entry Field, Select <ACK> 99 Yes

Font, Transmit <ESC>v 100 Yes

Font Character Width, Define Z 176 Yes

Font Type, Select c 178 Yes

Form Feed <FF> 101 Yes

Format, Create or Edit A or F 180 Yes

Format, Erase E 182 Yes

Format, Select <ESC>E 101 Yes

Format, Transmit <ESC>x 103 Yes

Format Direction in a Page, Define q 181 No

Format Offset Within a Page, Define O 182 No

Format Position From Page, Delete m 183 No

Format Position in a Page, Assign M 183 No

Formats, Print f 202 Yes

Graphic, Select c 184 Yes

Graphic or UDC, Define u 184 Yes

Hardware Configuration Label, Print h 202 Yes

Height Magnification of Bar, Box, or UDC, Define h 185 Yes

Human-Readable Field, Create or Edit H 187 Yes

IBM Language Translation, Enable or Disable <SI>i 122 Yes

Increment and Decrement, Disable <ESC>N 104 Yes

Intercharacter Delay, Set <SYN> 122 Yes

Intercharacter Space for UDF, Define z 188 Yes